Differences

This shows you the differences between two versions of the page.

--- homebrew [2023-06-14 16:20] – [Tips, tricks, problems] root
+++ homebrew [2023-06-21 05:14] (current) – [Recipes] root
@@ Line 64: / Line 64: @@
 The simplest possible airlock is using a ready plastic soft drink bottle's original lid, very lightly screwed on, enough that carbon dioxide generated during the fermentation process is released.
-A slightly better option is getting a regular latex balloon (for parties and such). With a sewing needle or pin, poke a few holes through the deflated balloon. Pull the balloon over the neck of your bottle and secure with rubber bands. The pressure and CO2 gas produced will cause the balloon to inflate during fermentation process, and CO2 will slowly leak out of the balloon without allowing oxygen back in. This is good: after initial fermentation, you don't want oxygen in the wine, as it'll impact the flavor and risk introducing contaminants. A zip-lock bag or even a condom can be subbed for a balloon, in a pinch, but make sure to use rubber bands or find some other means to keep the bag secured.
+A slightly better option is getting a regular latex balloon (for parties and such). With a sewing needle or pin, poke a few holes (2-6) through the deflated balloon. Pull the balloon over the neck of your bottle and secure with rubber bands. The pressure and CO2 gas produced will cause the balloon to inflate during fermentation process, and CO2 will slowly leak out of the balloon without allowing oxygen back in. This is good: after initial fermentation, you don't want oxygen in the wine, as it'll impact the flavor and risk introducing contaminants. A zip-lock bag or even a condom can be subbed for a balloon, in a pinch, but make sure to use rubber bands or find some other means to keep the bag secured.
+As an added bonus, you know your fermentation is complete when the balloon deflates. A golden rule: more time always yields better results. If you're not sure if the drink is done, wait to see if the balloon deflates more. With enough age, a cloudy, fully-fermented drink will even clear up: this is due to newer yeast consuming the older yeast.
 The most "try hard" option, but one that should be considered, is the use of a proper brewer's airlock. Cheap tapered rubber plugs exist for most vessel sizes, but you may have to order these online for about $5
@@ Line 120: / Line 122: @@
     * Any tips for cider/mead apply just as well here
   * Ginger ale
-    * After preparing a batch of kilju, add a roughly proportionate amount of ginger to the amount of sugar -- shredded very finely or minced.
+    * After preparing a batch of kilju, add a roughly double amount of ginger to the amount of sugar -- shredded very finely or minced.
-    * Add a small amount of lemon or lime juice (perhaps 50ml per liter).
+    * Add a small amount of lime juice (perhaps 2 limes per liter).
     * Brown sugar or molasses improves flavor.
   * Kool-aid wine